Caig DeoxIT D100L Squeeze Tube 100 Percent Solution 2ml Contact Cleaner 2ml tube. Please select the number of tubes you need.
Contact Cleaner & Rejuvenator – Brings Old Systems Back to Life! Â Use these wipes when you make new connections, and on a regulas basis to keep them at their best. Â We recommend retreating once a year, or any time you disconnect. Â This kit will also ensure that your flashlight, radio, cell phone and batteries work when you need them most.
Part No. D100L-2C:
100% Liquid, No solvents, 2.0 mL
Applicator: Squeeze Tube, provides NO flushing action, applies 100% DeoxIT®, Great for OEMs or include in service kit.
Formulation:  100% DeoxIT®.
Use: When contact and connector are easily accessible. No flushing action.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.
More than a Contact Cleaner . . . Improves & Protects Connections!
DeoxIT® D-Series contact treatment is a fast-acting deoxidizing solution that rejuvenates, lubricates, protects and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% deoxidizing action.
- KEY FEATURES:
- Improves Conductivity
- Deoxidizes, Lubricates and Protects
- Reduces Intermittent Connections
- Reduces Arcing & RFI
- Reduces Wear & Abrasion
- * Temperature Range, -34 C (-29 F) to +200 C (400 F)
* NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer
Caig DeoxIT D100L Squeeze Tube 100 Percent Solution 2ml is a fast-acting deoxidizing solution that cleans, preserves, lubricates and improves conductivity on metal connectors and contacts. Use as a general treatment for connectors, contacts and other metal surfaces. Use on non-critical metal surfaces with severe oxidation and corrosion on the metal surface. If there is a discoloration of the metal – it is severe. Use DeoxIT ® to dissolve the contamination. DeoxIT ® will also lubricate and protect the surface.
Improves Conductivity Deoxidizes, Cleans & Preserves Reduces Intermittent Connections Reduces Arcing & RFI Reduces Wear & Abrasion Temperature Range, -34oC to 200oC
Includes: DeoxIT® D1W, squeeze tube, one each Also available DeoxIT® Gold G100L 2ml Squeeze Tube
There are no reviews yet.