SolidSteel SS Series Vintage HiFi Speaker Stands

Solidsteel products are shipped from the US Distribution center in Chicago IL.

Solidsteel SS Series Speaker Stands Pair.

It is of critical importance for the performace of monitor-type loudspeakers to have them positioned at the correct height. Additionally, since this type of speaker is often relatively light in weight compared to floor-standing units, it is essential to maintain high stability and rigidity. And, as with all components, proper decoupling must be considered. The Solidsteel SS Series fulfils a longstanding need regarding the proper setup and anjoyment of monitor speakers, and must in many ways be considered as important as the units they support. The three tubolar supports end with a crimped steel bar. The stainless steel spikes are removable to allow the frame to be filled with damping material. The top plate in MDF is interchangeable, ensuring a high degree of optimization with the largest number of loudspeakers. Decoupling between the chassis and the shelf is achieved through three high precision ball bearings. The SS stands are also supplied with “Pata-fix” to properly fix the speaker to the top plate.

Specifications SS-5 Speaker Stand:

Three-leg plate in Flat Black, Raw Metal Clear Coat, and White finish;

MDF top plate in Flat Black finish;

Stainless steel vertical tubular supports with anti-resonant finish;

Height-adjustable, stainless steel spikes;

Weight: 13 Kg | 28.66 lbs

Finish: Black, Clear Coat Raw Metal or White

Outer Dimensions mm | inch:

W 330 (13)  H 725 (28,5)  D 310 (12,2)

Inner Shelves Dimensions mm | inch:

W 160 (6,3) D 160 (6,3)

Colour:

• • Black
  • White
  • Raw Metal Clear Coat

Solidsteel website http://solidsteel.it