Shop Vampire Wire Products
|Vampire Wire 800 CB Male RCA Connector||Vampire Wire BP 2 Gold Plated Binding Posts||Vampire Wire BP 3 Gold Plated Binding Posts|
Vampire Wire 800 CB Male RCA phono plug. Uniquely designed with a Copper Base body and direct gold plated. The #800/CB is the standard to which other RCA connectors are compared. The 800 CB fits up to 8.3 mm cable. Priced per pair.
Vampire Wire BP-2 is a replacement style binding post made of a brass base metal, nickel sub plate, hard gold finish, insulated (red/black) top nut. Shaft size is 0.127 in. 3.23mm, on 3/4 in. center. Set 2 Red 2 Black with mounting blocks and hardware.
Vampire Wire BP-3 is a replacement style binding post made of a brass base metal, nickel sub plate, hard gold finish, insulated (red/black) top nut. Shaft size is 0.186 in. 4.73mm, on 3/4 in. center. Set 2 Red 2 Black with mounting blocks and hardware.
|Vampire Wire C9X Male RCA Connector Pair||Vampire Wire RG6 Spade Connector||Vampire Wire Pin 1|
The Vampire Wire C9X Gold Plated Male RCA Connector is one of the best Male RCA Connectors available. The Vampire Wire C9X is a Tiffany Style RCA Connector, for up to 9.4mm diameter cables.
The Vampire Wire RG6 Spade Connector is made from pure copper then Gold Plated, and designed to accept up to 6 AWG cables by crimping or soldering. Priced per 2 pair.
Vampire Wire Pin-1 Crimp connector to wire 10-12 AWG. Great for attaching your speaker cables to 5 way binding posts. These pins are made from Copper, then Gold Plated. Priced per 4 pairs.
|Vampire Wire 808 RCA Plug||Vampire Wire BAR Spade Connector 4 Pair||Vampire Wire BPHEX CB Gold Plated Copper Binding Posts|
Vampire Wire 808 male RCA Plug is designed to offer the same mechanical integrity as the acclaimed #800/CB, but at a lower price. The #808 is machined from brass instead of OFC. Accepts up to 8.5 mm cable. Priced per pair.
The Vampire Wire BAR spade connector made from pure Gold Plated copper. Designed for barrier strips or older standard binding posts. Accepts 10 to 12 gauge cable. 4 pair.
Vampire Wire BPHEX CB designed to be the VERY BEST Binding Post available, and IT IS! The BPHEX CB is machined from a copper base metal and direct hard gold plated. Priced per set.
|Vampire Wire BPHEX Gold Plated Binding Posts||Vampire Wire C9X/CB Male RCA Connector Pair||Vampire Wire CM1F CB Female RCA Connector|
Vampire Wire BPHEX gold plated binding post. Made from one piece of hard brass, copper plated, silver plated, and finally gold plated. This 1/4” post set of 1 red and 1 black post with mounting block and mounting hardware.
The Vampire Wire C9X/CB Gold Plated Copper Male RCA Connector is one of the finest Male RCA Connectors available. The Vampire Wire C9X/CB is Made from a copper base, for up to 9.3mm diameter cables.
Made from oxygen free copper, the #CM1F/CB was developed to be the finest connector available. It is direct gold plated, with included isolation washers. Made to fit chassis with the mount nut on the inside. Priced per pair.
|Vampire Wire CM7F Female RCA Connector||Vampire Wire DB Banana Plug||Vampire Wire HDS-5 Spade Connector|
A High Quality RCA Chassis Connector pair. The Vampire Wire CM7F Female RCA Connector is designed to be the most cost effective way to get great performance out of of an RCA connector.
The Vampire Wire DB Gold plated heavy duty double banana plug for up to up to 6 ga. Speaker Cable. The #DB will fit standard 3/4” binding post spacing. Priced per set of 2 Double Banana Plugs.
2 pr. Vampire Wire #HDS5 Made from pure copper, then gold plated. Up to 12- 10 ga. and either solder or crimp. The HDS5 will fit larger barrier strips and 1/4 in. binding posts.
|Vampire Wire HDS3 Spade Connector||Vampire Wire LRCA8 Male Locking RCA||Vampire Wire RG8 Spade Connector|
The Vampire Wire HDS3 2 pr. set. The HDS3 is a heavy duty 8 mm spade connector made from pure copper, then gold plated. The HDS 3 will accept cables up to 6 AWG. Termination either solder or crimping.
Vampire Wire LRCA8 Male Locking RCA connector is designed to lock by compressing the ground crown to the chassis connector. Priced per pair.
Vampire Wire RG8 spade connectors, made from pure copper then Gold Plated, and designed to accept up to 8 AWG cables by crimping or soldering. RG8 is a stepped spade, made to fit 6mm, 5mm, and 3mm binding posts. Priced per 2 pair.
|Vampire Wire SB Banana Plug 2 Pair||Vampire Wire SC1108||Vampire Wire SS9 Spade Connectors 2 Pair|
The Vampire Wire SB Banana Plug Gold plated heavy duty single banana plug, for cable up to 6 ga. The #SB requires only 1/4” of cable to be stripped, and may be stacked for bi-wire use. Priced per 2 pairs
The #SC-1108 is a unique blend of Silver Plated Copper and OFHC Copper 13AWG speaker cable with PVC insulation. Great for Stereo Audio or home theater systems
The Vampire Wire SS9 Gold plated pure copper step spade connector 2 pr. Designed to accept 10-6 ga. cables by crimping or soldering. The SS-9 fits 9 mm to 1/4 binding post. Priced per 2 pair set.
|Vampire Wire XLR Female||Vampire Wire XLR Male||Vampire Wire Pin 2 Speaker Cable Connector|
Vampire's own XLR. Copper alloy contacts are direct gold plated, obtaining the finest results from a balanced connector. For use with up to 10 mm cables. Priced per pair.
Vampire's own XLR. Copper Base contact pins are direct gold plated, obtaining the finest results from a balanced connector. For use with up to 10 mm cables. Priced per pair.
Vampire Wire Pin-2 Crimp connector to wire 10-12 AWG. Great for attaching your speaker cables to 5 way binding posts and the Spring clips on some amps and speakers. Made from Brass, then Gold Plated. Priced per 4 pair.