Furutech Daytona 303 Multi-Mode AC Filter/Power Distributor
Click To Enlarge

The Furutech Daytona 303 Multi-Mode AC Filter/Power Distributor

Many A/V enthusiasts go to great lengths to carefully set up major system components, but pay little attention to the source, the AC power. Meticulous build quality is a large part of the engineering equation. Furutech Pure Transmission technology turns a macro lens on every element of power and signal transfer applying optimized engineering solutions to well-known problems such as contact resistance, EMI and RFI rejection, grounding, and using the best materials and processes available.  Furutech Daytona 303 Featuring Automatic Disconnect/Reconnect Protection Circuitry Stage 3 Filtering dramatically reduces induced, radiated and ground-borne noise 12 Surge-Protected AC outlets, 3 pair protected coaxial connections, and 1-in/2-out fully-protected phone line connections! The Daytona 303 is designed for Pro A/V Installations The Daytona 303 delivers dramatic audio and video performance plus truly comprehensive home theater and audio system protection. It’s specifically designed for professional installers working with high-end home entertainment systems, recording and touring venues. Furutech equipped the unit with these enhanced features: • Digital readout to simultaneously monitor voltage and current • Surge-protected phone connections • 3 pairs of protected 2.5GHz coaxial connections • 3 remote trigger controls • Front and back XLR lamp connectors so you can see what you're doing! The Daytona 303 Cleans AC Power for Better A/V Performance The Daytona 303 filters both AC line noise and reduces noise generated by other connected components in the system. This pro-level unit features 3 ultra-advanced isolating filter sections including 2 analog audio filters and 2 digital filters, plus 2 ultra-high-current audio filters. The result is robust AC power line noise rejection plus high-level inter-component isolation for top-level reproduction. Formula GC-303 GC-303 is a special material Furutech bonds to the interior bottom-plate of the chassis. (See illustration below) that absorbs EMI (Electromagnetic Interference) generated by the internal fittings of the unit. Provides the World's Most Advanced Protection for Your Valuable Components The Daytona 303 offers complete, comprehensive surge protection with an enormous 5250 joule capacity. Computer-controlled surge and voltage protection circuits monitor line voltage and disconnects instantly when dangerous over- or under-voltages occur, then reconnects the unit after the power returns to safe levels, protecting your gear. The Daytona 303 Performance Envelope Furutech recognizes that convenience is as important as function, and that’s why the Daytona 303 is rack-mountable for easy integration into custom-installed rack-mount systems, with a convenient XLR lamp connector on the back of the chassis making it easy to see what you’re doing! The Complete Power Solution The Daytona 303 offers complete, comprehensive surge protection, power conditioning plus pro-level convenience features to protect the significant investment you’ve made in your system. Dramatically improved image and sound are the improvements you’ll see and hear first time, every time. 100V AC 50/60Hz 1500 VA 120V AC 60Hz 1800 VA 15 A Max.

The Daytona: 24 Hour Protection for Pro A/V and High Performance Enthusiasts

All enthusiasts are looking for the same qualities: Verisimilitude to the original event, a sense of engagement promoting suspension of disbelief, an immersion in audio and video experience. To engage without effort requires meticulous preparation of the entire playback chain especially including the AC mains supply.

The Daytona 303 is a sophisticated, luxuriously made single-chassis power distributor and filtering unit that eliminates many common problems caused by massively contaminated electrical power lines. The AC mains waveform is heavily distorted by ground noise, voltage spikes and sags, high frequency power supply noise from other components in your own system, plus high frequency digital noise radiating from processors and digital interconnects. 

 There are also distortion products at the top and bottom of the AC waveform created by switch-mode power supplies in small electronics and charging devices on the same circuit. Additionally, you’re never alone; your residential AC supply is shared with other apartments, homes, and businesses on the same utility transformer. That’s why many audio and video enthusiasts notice their systems are more enjoyable late at night or on weekends!

Under the Hood

Like a Daytona GT racer, the Furutech Daytona 303 is purpose-made to comprehensively protect your audio and video system with 5250 joules of surge protection plus 3 types of filtering that dramatically reduces induced, radiated and ground-borne noise. Micro-circuits monitor line voltage and disconnects instantly if dangerous over- or under-voltages occurs, then reconnects once the power returns to safe levels. 

 The Daytona also features three ultra-advanced isolating filter sections including two analog, two digital, plus another pair of ultra-high-current audio filters. The Daytona also sports 10 surge-protected AC outlets, 6 Digital filtered outlets (Filter 1, 2 and 3), plus 2 ultra-high-current, 4 unfiltered outlets (Direct 1 and 2). Also 3 pair of protected coaxial connections and 1-in/2-out fully-protected phone line connections. 

 On the Track

The Daytona 303 relieves your system of flat, hard, and grainy high frequencies, a thick and bloated midrange over wooly bass, a loss of air, detail and soundstage instability. On video displays the picture resolution is sharper, with no ghosting, color shift, snow, or vertical and horizontal lines to spoil the view. If this sounds familiar, you need a Furutech Daytona 303!

Specifications:

• All conductors treated with Furutech’s a (Alpha) Cryogenic and Demagnetizing Process
• 4 unfiltered outlets (FT-D15A (R) X 2)
o Power amplifiers (Direct 1)
o Preamplifiers, analog devices (Direct 2)
• 6 Digital filtered outlets (FP-15A-N1(R) X 3)---Transparent Cover
o DVD and DVR (Filter 1 /Zone 1)
o CD?Cable and SAT(Filter 2 /Zone 2)
o TV and Projector (Filter 3 /Zone 3)
• Pure Transmission High Performance Receptacles
o Nonmagnetic Rhodium-plated a (Alpha) phosphor bronze
• Beautifully-crafted highest grade aluminum panel and painted steel chassis
o Effectively shields against RFI (Radio Frequency Interference)
• Layer of Formula GC-303 bonded to bottom plate
o Effectively shields against EMI (Electro Magnetic Interference)
• Internal wiring: Furutech Alpha-10, 5.5 sq. mm (10 AWG), for low electrical resistance. Conductors insulated with resonance-absorbing tubing
• 24k gold-plated Nonmagnetic PCB
• WIMA High Performance Main Capacitors
• Front panel --- Eight indicators for effective check of abnormal voltage or amperage ---
o abnormal voltage indicator (Red)
o Filter 1?2?3 /Zone 1?2?3 (Green)
o Correct Path indicator (Green)
o Breaker indicator (Red)
o Digital voltage meter(Red)
o Digital amperage meter(Red)

• Rear panel ---
o Attachable LED Lamp for easy check or change of connections
o Three sets of surge protected coaxial terminals
o Surge protected 3-way (Input x 1 + Output X 2) phone connections
o Remote control AC 100~120V In / DC 3~30V In / DC 12V Out (attachment)
o Incorporates standardized mounting plates for equipment rack installation
o Sequence Switch for Disable / Enable
o Voltage Selector switch for 120V AC (60Hz) / 100V AC (50/60Hz) 

  • Item #: FUDAYTONA303AC
  • Manufacturer: Furutech
  • Manufacturer's Product Number: Daytona 303

Furutech Daytona 303 Multi-Mode AC Filter Power Distributor

Price: $3,200.00
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review